Antia - Two-Component 200ml Adhesive for Structural Bonding
Antia products
Categories
Antia products appear in these categories:
Antia is a brand focused on two-component adhesives for structural bonding. Its products cover a specific niche: situations where water-based glue won't hold - metal to metal, metal to stone, repairs that need to survive vibration and mechanical load.
At Colorista.md, Antia is stocked as a 2K two-component adhesive in 200ml packaging. A compact, technically focused range. Not a general painting supply - an adhesive for people who know exactly what they're bonding and why.
What does two-component mean in practice? Resin and hardener sit separate until use. Mixing triggers a chemical reaction - the result is a chemical bond, not just a mechanical one. Load resistance, moisture resistance and thermal cycling performance are well above standard single-component adhesives. For assembly, technical repairs or joints under stress - this is the type of product that performs differently.
Mix equal parts (or the ratio stated on the pack) of resin and hardener on a clean surface until the colour is uniform. Apply immediately to a clean dry surface. Follow the ratio exactly - excess of either component reduces bond strength.
Pot life depends on formulation and temperature - check the product label. Typically 3-10 minutes at room temperature for standard two-part adhesives. Higher temperatures shorten working time.
Two-part epoxy-based adhesives generally have good moisture resistance after full cure. Check the product label for exact resistance data.