M

Maan - painting tools and accessories from Poland

PL

Maan products

Categories

Maan products appear in these categories:

A good brush doesn't shed after the 50th pass. A cheap one starts shedding by the third.

Maan started in 1991 near Krakow as a small brush factory. Today they make tools for painting, construction, sanding and garden work - exported across Europe. Not a lifestyle brand. A working brand used by tradesmen daily.

What you'll find at Colorista from Maan:

Brushes and rollers - flat and round brushes for paint, varnish, primer. Natural and synthetic bristle for different viscosities. Roller covers in short, medium and long nap for latex, alkyd and facade coatings.

Scrapers and finishing tools - stainless steel, plastic, rubber. For filler, silicone, foam. Different widths for large surfaces and detail work.

Sandpaper and discs - grit 40 to 400. For hand and machine sanding. Standard hook-and-loop mount for orbital sanders.

Masking and protection supplies - masking tape, drop cloth, gloves, respirators. What you need before you open the tin.

For renovation jobs in Chisinau - whether you're doing a flat in Riscani or a commercial space - a full Maan kit means you don't need a second supply run mid-job.

Go with synthetic bristle - it doesn't absorb water, doesn't shed, cleans up fast. The Maan polyester round brush is the standard choice for cutting in at corners and trim.

Short nap (4-6 mm) for smooth surfaces - finished plaster, tile, metal. Long nap (12-18 mm) gets into texture - rough render, concrete, exterior walls. Medium (9 mm) is the all-round choice.

Maan sanding discs come in 125 mm hook-and-loop format, compatible with standard orbitals. For sanding between filler coats use 120-180 grit. For wood - start at 80, finish at 150-220.

Clean it right after use - water rinse for latex, solvent for alkyd - then store it straight. Properly maintained, a Maan brush lasts dozens of sessions. Problems start when paint dries in the bristles.

Yes. Wide facade brushes, solvent-resistant roller covers for alkyd and oil-based coatings, scrapers for joint sealing. Solvent compatibility is marked on the packaging.